Frp railing is a kind of composite material made of fiberglass and resin, which has the advantages of high strength, corrosion resistance, light weight, easy installation and maintenance. Frp railing can be used in various environments, such as bridges, platforms, stairs, walkways, etc. Here are some steps and tips for installing frp railing.

Before installing frp railing, you need to prepare the following materials and tools:

Use a tape measure and a pencil to mark the installation position of the frp railing on the ground or the wall. Make sure the distance between the posts is even and the height of the railing is suitable. Use a level to check the horizontal and vertical alignment of the marks.

Use a drill to make holes on the marked position according to the size of the screws. Insert the screws through the base plate of the post and secure them with nuts and washers. Make sure the post is firmly fixed and perpendicular to the ground or the wall.

Use a drill to make holes on the posts according to the size of the connectors. Insert the connectors through the holes and secure them with nuts and washers. Attach the rails to the connectors and tighten them. Make sure the rails are parallel to each other and aligned with the posts.

Use a drill to make holes on the rails according to the size of the brackets. Insert the brackets through the holes and secure them with nuts and washers. Attach the brackets to the posts and tighten them. Make sure the brackets are stable and support the rails.